Berkel 827E-PLUS 12" 1/3 HP Manual Gravity Feed Entry Series Slicer
Berkel Model: 827E-PLUS SKU: 145805
Out Of Stock
Item discontinued!
| Similar Models Available: |
|---|
 New B12-SLC |
 New B12A-SLC |
Notice: Shop now before the manufacturer price increase on Jan 01, 2025
Recommended Substitute
Berkel 827E-PLUS Specifications
Low Price Guarantee On All Berkel Products!
Item: 12" 1/3 HP Manual Gravity Feed Entry Series Slicer
Model:827E
Features
Attention CA Residents
Model:827E
Features
- 1-speed, 1/3 HP totally enclosed and permanently lubricated knife motor
- Furnished in 115/60/1, 3.1 amp, AC, ETL listed.
- Finish is stainless steel and sanitary, anodized aluminum; unit disassembles quickly without tools for easy cleaning
- 827E is a nominal 12" (300 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife
- 827E carriage handles food up to 8-3/4” (222 mm) wide, by 7-1/4” (184 mm) high or 7” (178 mm) diameter
- Precise slice adjustment to a thickness of 9/16” (14 mm)
- Built-in, top-mounted, two stone knife sharpener with dual-action system
- Permanent, tapered knife ring guard covers non-slicing portion of knife even when the sharpener and center plate are removed; ring guard design provides more room behind the knife for easy cleaning
- Positive, moisture protected, on/off rocker switch; and power indicator light
- Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle
- One year limited parts and labor warranty
Manufacturer Information | |
| Brand | Berkel |
|---|---|
| Model | 827E-PLUS |
| Model | 827E |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
| Watts | 288 |
Item Dimensions | |
| Weight | 49.00 lbs. |
| Width | 18.00 in. |
| Depth | 22.00 in. |
| Height | 16.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
