Captive-Aire Systems, Inc. 4212SND-2 - 10 10ft SND-2 Series Stainless Steel Sloped Wall Canopy Hood
Ideal choice for a low ceiling height
Captive-Aire Systems, Inc. Model: 4212SND-2 - 10 SKU: 189531
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
| As low as $298/month |
|
Captive-Aire Systems, Inc. 4212SND-2 - 10 Specifications
Have peace of mind with Captive Aire's SND-2 Series model which comes insulated with double-wall rigid front to reduce radiant heat into kitchen or food truck. No more worrying about condensation and toxic cooking vapors flooding your establishment with this 10 ft unit. Its stainless steel baffle filters and deep grease trough will allow for easy clean up. Don't delay!
Features:
- Superior exhaust flow rates
- Insulated, double-wall rigid front
- Mechanical baffle on the front of the hood's capture area
- Factory pre-wired lighting accessible from the bottom of the hood
- UL Listed, pre-wired incandescent light fixtures and tempered glass globes
- Pre-punched hanging angles on each end of hood
- Polished stainless steel interior and exterior
- Rigid single wall end panels
- Stainless steel baffle filters and grease cup included
- UL listed
- ETL
This hood is brand new, shipped directly from the manufacturer.
Make This Hood a Package by including Exhaust Fan, and Make Up Air Fan. For more info call a hood specialist at 404-752-6715 today!
Please note: local ordinances may require additional accessories to meet fire and safety codes. Check with local code departments before purchasing. Please call us directly with more questions about necessary accessories.
Hoods are manufactured to order. They are usually manufactured and shipped out within 10 business days. Delivery times vary depending on your location. Thank you for your understanding and patience.
This is NOT the entire Hood System that you would need. This is only for the major components as they apply to NFPA 96 Codes. To the right we have listed specific accessories for this model. Please check your local code for states that require an ETL listed hood.
Manufacturer Information | |
| Brand | Captive-Aire Systems, Inc. |
|---|---|
| Model | 4212SND-2 - 10 |
Power Information | |
| Power | 120 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 311.00 lbs. |
| Width | 120.00 in. |
| Depth | 48.00 in. |
| Height | 12.00 in. |
Packing Info | |
| Packing Fee | $300.00 |
Documents
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
NFPA Certified
This product has been certified by the National Fire Protection Association (NFPA) as meeting standards for fire safety including electrical integrity, heat resistance, fire and explosion hazards, seal integrity and more.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
Made in the USA
This product was manufactured in the United States of America.
