Duke Manufacturing E303 Electric Aerohot 3 Compartment Steam Table Exposed Elements
Duke Manufacturing Model: E303 SKU: 33759Calculate Estimated Cost | |
Only for customers within the 48 contiguous states..
|
As low as $150/month |
Duke Manufacturing E303 Specifications
Low Price Guarantee On All Duke Manufacturing Products!
This item is BRAND NEW and shipped directly from the manufacturer with a full warranty.
PLEASE NOTE:
THESE UNITS ARE MADE TO ORDER. THERE WILL BE A 3 TO 4 WEEK LEAD TIME BEFORE UNITS SHIP OUT.
Item:Aerohot Steamtable Hot Food Unit.
Item Number: E303
Description:
Aerohot Steamtable Hot Food Unit, 44-3/8"L, elec., (3) 12"x20" hot food wells w/exposed elements, infinite controls, s/s top w/1/2" thick x 7" wide poly carving board, s/s open base w/undershelf, legs & feet.
The specifications for this item are as follows:
(3) 12"x20" hot food wells with exposed elements,
Infinite controls
Stainless steel top with 1/2" thick x 7" wide poly carving board
Stainless steel open base with undershelf legs & feet
TOP: 20 gauge, 300 Series stainless steel
Die-stamped openings - 12" x 20"
Poly carving board - 7"W x 1/2" thick with 18 gauge stainless steel support base and die-stamped brackets
HEAT COMPARTMENTS: Each with die-formed 8" deep galvanized liner with exposed elements. You would not be able to fill the wells with water.
Insulated with 1" thick fiberglass or equal, all four sides and bottom
Single phase standard
BODY, UNDERSHELF AND LEGS: 20 gauge, 430 Series stainless steel body
18 gauge, 430 Series stainless steel undershelf
430 Series stainless steel tubular legs with adjustable plastic feet
ELECTRICAL INFORMATION: Wired to operate on 120, 208 or 240 volt
AC current
Each section with infinite switch
Permanently wired, 6' long cord with plug provided
Attention CA Residents
PLEASE NOTE:
THESE UNITS ARE MADE TO ORDER. THERE WILL BE A 3 TO 4 WEEK LEAD TIME BEFORE UNITS SHIP OUT.
Item:Aerohot Steamtable Hot Food Unit.
Item Number: E303
Description:
Aerohot Steamtable Hot Food Unit, 44-3/8"L, elec., (3) 12"x20" hot food wells w/exposed elements, infinite controls, s/s top w/1/2" thick x 7" wide poly carving board, s/s open base w/undershelf, legs & feet.
The specifications for this item are as follows:
TOP:
HEAT COMPARTMENTS:
BODY, UNDERSHELF AND LEGS:
ELECTRICAL INFORMATION:
Manufacturer Information | |
Brand | Duke Manufacturing |
---|---|
Model | E303 |
Power Information | |
Power | 120 volts |
Phases | 1 |
Watts | 2250 |
Item Dimensions | |
Weight | 125.00 lbs. |
Width | 45.00 in. |
Depth | 23.00 in. |
Height | 34.00 in. |
Documents
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.