Follett 7UD100A-NW-CF-ST-00 7 Series Undercounter 125 lb Nugget Ice / Water Dispenser
Features internal filter
Follett Model: 7UD100A-NW-CF-ST-00 SKU: 230499Recommended Substitute
Follett 7UD100A-NW-CF-ST-00 Specifications
The 7 Series ADA-height undercounter ice-only dispenser produces up to 125 lbs of Chewblet nugget ice per day, while holding 7 lbs of ice in storage, ideal for work groups up to 50 people. Other key features include sanitary, capacitive touch dispensing, internal filter, and a unique drainless design that allow this model to be installed virtually anywhere there is water and electricity available.
Features:
- 7 Series Ice Dispenser
- Undercounter
- For 34" high ADA counters
- Integral air-cooled ice machine
- Chewblet® ice
- Up to 125 lb. production in 24 hours
- 7 lb. storage capacity
- Stainless steel exterior with accent trim
- Key components protected with silver-based antimicrobial to inhibit growth on treated surfaces
- Leak detection sensors in the base protect the machine from water leaks
- Uses up to 50% less electricity and up to 70% less water to produce ice than similar-sized, cube?type ice machines
- 8.5" dispense height fits most commonly used drinking cups and glasses
- Removable drip tray alerts you when drip tray is full; snaps in and out easily
- Fully assembled, requires just two easy connections for electric and water
- Simple cleaning procedure - can be cleaned without the use of special tools in less than 1 hour
- Internal filter
- Drainless design
- NSF
- cETLus
- ADA Compliant
Warranty:
- 3 Year Parts & Labor
- 5 Year Parts-Only Compressor
Manufacturer Information | |
Brand | Follett |
---|---|
Model | 7UD100A-NW-CF-ST-00 |
Power Information | |
Power | 115 volts |
Phases | 1 |
Item Dimensions | |
Weight | 94.00 lb |
Height | 31.50 in |
Width | 14.62 in |
Depth | 22.12 in |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.