Frymaster MJ45E-SD Performance Gas Deep Fryer 50lb Capacity 122k BTU/hr
Frymaster Model: MJ45E-SD SKU: 46702
Out Of Stock
Item discontinued!
Recommended Substitute
Frymaster MJ45E-SD Specifications
Low Price Guarantee On All Frymaster Products!
This item is shipped brand new direct from the manufacturer. Please note: Casters are sold seperately.
MJ45E-SD, 50lb open pot fryer
The MJ45E has a minimum 40-Ibs. (20 liters) and maximum 50-Ibs. (25 liters) shortening capacity. The frying area is 14 x 15 in. (356 x 381 mm) at shortening level. This 122,000 BTU/hr. (128.7 megajoules/hr.) (35.8 kW) model is specifically designed for high-volume frying. The exclusive 1o action thermostat anticipates rapid rate of temperature rise, reducing temperature overshoot, extending shortening life and producing a more uniformly-cooked product. Centerline thermostat mounting permits quick sensing (7 to 10 seconds) of cold food placed in either basket. Multiple orifice burner has no burner tube radiants to burn out. No burner cleaning or air shutter adjustment is required. The open stainless steel frypot has a large heat transfer area to fry more product per load. The open-pot design has no hard-to clean tubes. Every inch of the frypot and cold zone can be cleaned and wiped down by hand. The large cold zone catches crumbs and sediment from the frying area. These particles are trapped in the cold zone where they do not carbonize, contaminate shortening or cling to fried products. The MJ45E model uses a 120V supply system to accommodate additional accessories.
Features and Specifications:
Specifically designed for high-volume frying
Open-pot design, no tubes, easy to clean
40 to 50 lbs oil capacity
122,000 BTUs
S/S pot & door
Enamel cabinet
Durable centerline thermostat
7-to-10 second response to loads, 1° anticipating action, reduced temperature overshoot
Deep cold zone, 1-1/4 in. (32 mm) IPS ball-type drain valve
Master Jet burner, no burner tube radiants to burn out, no cleaning or adjusting air shutters
Rounded corners for easy-to-clean
Warranty
1 year parts & labor, 2nd & 3rd year frypot assembly only, no labor. After 3rd year lifetime on the bare pot.
Attention CA Residents
MJ45E-SD, 50lb open pot fryer
The MJ45E has a minimum 40-Ibs. (20 liters) and maximum 50-Ibs. (25 liters) shortening capacity. The frying area is 14 x 15 in. (356 x 381 mm) at shortening level. This 122,000 BTU/hr. (128.7 megajoules/hr.) (35.8 kW) model is specifically designed for high-volume frying. The exclusive 1o action thermostat anticipates rapid rate of temperature rise, reducing temperature overshoot, extending shortening life and producing a more uniformly-cooked product. Centerline thermostat mounting permits quick sensing (7 to 10 seconds) of cold food placed in either basket. Multiple orifice burner has no burner tube radiants to burn out. No burner cleaning or air shutter adjustment is required. The open stainless steel frypot has a large heat transfer area to fry more product per load. The open-pot design has no hard-to clean tubes. Every inch of the frypot and cold zone can be cleaned and wiped down by hand. The large cold zone catches crumbs and sediment from the frying area. These particles are trapped in the cold zone where they do not carbonize, contaminate shortening or cling to fried products. The MJ45E model uses a 120V supply system to accommodate additional accessories.
Features and Specifications:
Warranty
1 year parts & labor, 2nd & 3rd year frypot assembly only, no labor. After 3rd year lifetime on the bare pot.
Manufacturer Information | |
| Brand | Frymaster |
|---|---|
| Model | MJ45E-SD |
Power Information | |
| Power | 120 volts |
| Phases | 1 |
| Uses Gas? | Yes |
| BTU's | 122,000 |
Item Dimensions | |
| Weight | 202.00 lbs. |
| Width | 15.63 in. |
| Depth | 31.50 in. |
| Height | 46.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
CSA Certified
This product has been certified by the Canadian Standards Association (CSA) for its use type. Products with more than one power type, such as electric and gas features, will have multiple CSA certifications.
