Nor-Lake SSG366-3 3 Tier Shelving Kit for 3.5x6 Walk-In Cooler or Freezer
Nor-Lake Model: SSG366-3 SKU: 167149
Out Of Stock
Item discontinued!
| Similar Models Available: |
|---|
 New SSG610-3 |
 New SSG610-4 |
 New SSG46-3 |
 New SSG46-4 |
 New SSG812-3 |
Recommended Substitute
3 Tier Shelving Kit for 6 x 10 Walk-In Cooler or Freezer
Nor-Lake
SSG610-3
SKU# 167319
$1,038.50
Login for more information
Nor-Lake SSG366-3 Specifications
Low Price Guarantee On All Nor-Lake Products!
This item is brand new and ships directly from the manufacturer.
Please note: Picture is for reference only.
PLEASE ALLOW 3 WEEKS FOR SHIPPING
Item: 3 Tier Green-Kote Shelving Kit™ for 3.5 x 6 Walk-In Cooler or Freezer
Model: SSG366-3
Please note: This shelving kit is configured specifically for a 3.5 x 6 Norlake Walk-in Coolers and Freezers.
For use in floor or floorless walk-ins of at least 6’ 4” over all height.
Fits in walk-ins with either 4” or 5” thick insulation wall panels
These kits are shipped with the walk-in so that all necessary components are at your location promptly when you need them. The shelving sets are coded to correspond to the walk-in configuration ordered. When ordering shelving please indicate door locations for walk-ins larger than 6’ x 6'.
This wire shelving is ideal for storage of all refrigerated or frozen products as well as non-refrigerated storage. Special clips are utilized to gain the maximum square footage of storage space for each model.
Specifications
SHELVES:
Shelves have #9 (.148”) gauge crosswires spaced 3/4” on centers with crossbraces
1/4” (.192”) minimum of 4-3/4” on center.
Shelves are adjustable on 2” centers.
SHELF FRAMES
Channel is 9/16" x 1" x .075" thick.
Shelf Collars
A round tapered 1-5/16" high steel collar to be welded at each corner.
FINISH
Green Kote™: Electrostatically applied green baked epoxy over zinc steel and brite basic wire.
Thickness: 4-7 mill.
15 year guarantee against corrosion
POSTS
Posts are 0.062" thick 1" O.D. round tubing notched every 2" on each corner of the post. Shelving posts are engineered for maximum strength.
POST LEVELER
Installed on the bottom of each post is nylon housing for a steel leveler 3/8"-16 x 1-3/4".
FINISHES
Green Kote™: Electrostatically applied green baked epoxy over green zinc steel and brite basic wire.
Thickness: 2-3 mill.
Attention CA Residents
Please note: Picture is for reference only.
PLEASE ALLOW 3 WEEKS FOR SHIPPING
Item: 3 Tier Green-Kote Shelving Kit™ for 3.5 x 6 Walk-In Cooler or Freezer
Model: SSG366-3
Please note: This shelving kit is configured specifically for a 3.5 x 6 Norlake Walk-in Coolers and Freezers.
Specifications
SHELVES:
SHELF FRAMES
FINISH
POSTS
POST LEVELER
FINISHES
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
