Nor-Lake SSG46-3 3 Tier Shelving Kit for 4 x 6 Walk-In Cooler or Freezer

Please not that shelving only ships free when ordered with a walk-in.

Please note: This shelving kit is configured specifically for a 4 x 6 Norlake Walk-in Coolers and Freezers.


• For use in floor or floorless walk-ins of at least 6’ 4” over all height.
  
  
• Fits in walk-ins with either 4” or 5” thick insulation wall panels
  
  
• These kits are shipped with the walk-in so that all necessary components are at your location promptly when you need them. The shelving sets are coded to correspond to the walk-in configuration ordered. When ordering shelving please indicate door locations for walk-ins larger than 6’ x 6'.
  
  
• This wire shelving is ideal for storage of all refrigerated or frozen products as well as non-refrigerated storage. Special clips are utilized to gain the maximum square footage of storage space for each model.
  
  Specifications
  
  SHELVES:
  
• Shelves have #9 (.148”) gauge crosswires spaced 3/4” on centers with crossbraces 1/4” (.192”) minimum of 4-3/4” on center.
  
• Shelves are adjustable on 2” centers.
  
  SHELF FRAMES
  
• Channel is 9/16" x 1" x .075" thick.
• Shelf Collars
• A round tapered 1-5/16" high steel collar to be welded at each corner.
  
  FINISH
  
• Green Kote™: Electrostatically applied green baked epoxy over zinc steel and brite basic wire.
• Thickness: 4-7 mill.
• 15 year guarantee against corrosion
  
  POSTS
  
• Posts are 0.062" thick 1" O.D. round tubing notched every 2" on each corner of the post. Shelving posts are engineered for maximum strength.
  
  POST LEVELER
  
• Installed on the bottom of each post is nylon housing for a steel leveler 3/8"-16 x 1-3/4".
  
  FINISHES
  
• Green Kote™: Electrostatically applied green baked epoxy over green zinc steel and brite basic wire.
• Thickness: 2-3 mil.