Nor-Lake SSG810-4 4 Tier Shelving Kit for 8 x 10 Walk-In Cooler or Freezer

Please not that shelving only ships free when ordered with a walk-in.

Please note: Picture is for reference only.

PLEASE ALLOW 3 WEEKS FOR SHIPPING

Item: 4 Tier Green-Kote Shelving Kit™ for 8 x 10 Walk-In Cooler or Freezer
Model: SSG810-4

Please note: This shelving kit is configured specifically for a 8 x 10 Norlake Walk-in Coolers or Freezer.

For use in floor or floorless walk-ins of at least 6’ 4” over all height.

Fits in walk-ins with either 4” or 5” thick insulation wall panels

These kits are shipped with the walk-in so that all necessary components are at your location promptly when you need them. The shelving sets are coded to correspond to the walk-in configuration ordered. When ordering shelving please indicate door locations for walk-ins larger than 6’ x 6'.

This wire shelving is ideal for storage of all refrigerated or frozen products as well as non-refrigerated storage. Special clips are utilized to gain the maximum square footage of storage space for each model.

Specifications

SHELVES:

Shelves have #9 (.148”) gauge crosswires spaced 3/4” on centers with crossbraces 1/4” (.192”) minimum of 4-3/4” on center.

Shelves are adjustable on 2” centers.

SHELF FRAMES

Channel is 9/16" x 1" x .075" thick.

Shelf Collars

A round tapered 1-5/16" high steel collar to be welded at each corner.

FINISH

Green Kote™: Electrostatically applied green baked epoxy over zinc steel and brite basic wire.

Thickness: 4-7 mill.

15 year guarantee against corrosion

POSTS

Posts are 0.062" thick 1" O.D. round tubing notched every 2" on each corner of the post. Shelving posts are engineered for maximum strength.

POST LEVELER

Installed on the bottom of each post is nylon housing for a steel leveler 3/8"-16 x 1-3/4".

FINISHES

Green Kote™: Electrostatically applied green baked epoxy over green zinc steel and brite basic wire.

Thickness: 2-3 mill.