Southbend S36A-1G 36" S-Series Range w/ Convection Oven & 12" Griddle Left
Southbend Model: S36A-1G SKU: 150234
$9,377.00/each
| Similar Models Available: |
|---|
 New S36A |
 New S36A-2G |
 New S36A-3G |
 New S36A-2TL |
 New S36A-3T |
Free Shippingon Southbend products |
|
|
Only for customers within the 48 contiguous states..
| |
Southbend S36A-1G Specifications
Please note: The above photo is for reference only
Southbend’s S-Series restaurant range offers a quality, versatile range for commercial foodservice applications. 24", 36", 48", and 60" widths and a number of top configurations are available. Configurations include combinations of open burners, griddles and hot tops.
S-Series, gas, 36", 12" manual griddle, (4) non-clog burners, convection oven, 165,000 BTU
Features:
- 36½" wide open top with stainless steel front, sides and removable shelf.
- (4) 28,000 BTU NAT (24,000 BTU LP) PAINTED, once-piece cast iron, non-clog burners with Lifetime Warranty
- 24", smooth, polished 1/2" thick steel griddle plate with raised sides, to include (1) 18,000 BTU left side burner
- 4" Stainless steel front rail with closed, welded end caps
- Removable, one-piece crumb drawer under burners
- Metal knobs w/ red stripe
- Hinged, lower valve panel
- Quadrant spring doors with ergonomic chrome handle
- 6" stainless steel, adjustable legs
- Factory installed pressure regulator
- 35,000 BTU convection oven with snap action thermostat adjustable for 175°F to 550°F
- U-shaped heavy duty oven burner
- Equipped with flame failure safety device
- Large 26" wide X 26½" deep oven with all oven cavity parts enameled
- Four sides and top of oven insulated with heavy, self-supporting block type rock wool with oven baffle assembly
- 1/2 HP, 1710 rpm, 60 cycle, 115V AC high efficiency, permanent split phase motor.
- On/Off switch to allow CO base to operate as a standard oven
- 5-position rack guides with two (2) removable racks included
- Gas options: Natural or LP (Options at checkout)
- NSF
- CSA certified
- Made in USA
Warranty:
1 Year parts & labor
Manufacturer Information | |
| Brand | Southbend |
|---|---|
| Model | S36A-1G |
| Model | S36A-1GL |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
| Uses Gas? | Yes |
| BTU's | 165,000 |
Item Dimensions | |
| Weight | 660.00 lb |
| Height | 59.50 in |
| Width | 36.50 in |
| Depth | 44.00 in |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
CSA Certified
This product has been certified by the Canadian Standards Association (CSA) for its use type. Products with more than one power type, such as electric and gas features, will have multiple CSA certifications.
Made in the USA
This product was manufactured in the United States of America.
