Superior Hoods FIRESUPPRZD10 Zone Defense Fire Suppression System for 10ft Hood
This item must be ordered along with the hood
Superior Hoods Model: FIRESUPPRZD10 SKU: 23906Similar Models Available: |
---|
New FIRESUPPRZD12 |
New FIRESUPPRZD11 |
New FIRESUPPRZD16 |
New FIRESUPPRZD14 |
New FIRESUPPRZD13 |
Calculate Estimated Cost | |
Only for customers within the 48 contiguous states.. |
Superior Hoods FIRESUPPRZD10 Specifications
This listing is for the addition of a fire suppression system to a new hood.
This system is for medium to high heat applications. Standard cooking equipment such as 1-Fryer, Ranges, Griddles, etc are considered medium to high heat.
uses a highly effective liquid suppressing agent that fights fires three ways:
- Breaks the Chemical Reaction by interrupting the chemical chain that causes fires to spread intensify. It stops fire cold.
- Creates Steam and Cools, reducing damage and helps prevent re-ignition.
- Smothers the fire when discharged, a chemical chain reaction produces a soapy foam. Oxygen is cut off The fire goes out. The thick layer of foam reduces the possibilities of re-ignition.
- Listed by Underwriters Laboratories, Inc., tested to UL 300
- Listed by Underwriters Laboratories of Canada, tested to ULC/ORD-1254C.6
- Conforms to NFPA standards 17A and 96
- New York City MEA approval
- DOT rated steel cylinders
Equipment that emits EXCESSIVE heat, flames, smoke, or which produces higher than usual grease vapors would require a custom system. To order, contact our Hood Specialists on 404-752-6715.
Installation Requirements
The installed Fire Suppression System will require an equipment layout utilizing a maximum 2" gas valve, which will equal roughly 3 million BTU's. This is pre-piped but the Installer will need to finish connecting the piping both to the pull station and the inside of the exhaust plenum after the hole for the exhaust duct is cut.
Certifications
- Listed by Underwriters Laboratories, Inc., tested to UL 300
- Listed by Underwriters Laboratories of Canada, tested to ULC/ORD-1254C.6
- Conforms to NFPA standards 17A and 96
- New York City MEA approval
- DOT rated steel cylinders
Notices
Please note local ordinances may require additional accessories to meet fire and safety codes. Check with local code departments before purchasing. Please call us directly with more questions about necessary accessories.
Fire Suppression is only available for new Hoods purchased from ACityDiscount.
This listing is for the ADDITION of a Fire Suppression System for a new 10' Hood.
Manufacturer Information | |
Brand | Superior Hoods |
---|---|
Model | FIRESUPPRZD10 |
Model | FIRESUPP-10 |
Item Dimensions | |
Weight | 70.00 lbs. |
Width | 31.00 in. |
Depth | 31.00 in. |
Height | 10.00 in. |
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
Made in the USA
This product was manufactured in the United States of America.