True TM-74 74 Cu.Ft Reach-In Commercial Cooler S/s 3 Solid Doors
True Model: TM-74 SKU: 38898
Out Of Stock
Item discontinued!
Notice: Shop now before the manufacturer price increase on Feb 15, 2025
Recommended Substitute
True TM-74 Specifications
Low Price Guarantee On All True Products!
This item is a BRAND NEW cooler, comes with the manufacturers warranty. TM-74 model has 74 cubic foot storage space and comes with 9 shelves.
This machine has many features and benefits including:
CABINET CONSTRUCTION:
300 series stainless steel front grill, shroud and doors. Anodized quality aluminum exterior ends and back.
NSF approved, white vinyl coated aluminum and 300 series stainless floor with coved corners.
Barrel lock standard for each door. Locks keyed alike. Digital exterior mounted temperature monitor.
Cabinet mounted on a welded, galvanized frame rail, painted for additional
corrosion protection. Frame rail fitted with 4in diameter castors, front castors include brakes).
DOORS:
300 series stainless steel exterior with white aluminum interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.
Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 12in long recessed handle with sheetmetal interlock. Handles are foamed-in-place to insure permanent attachment.
INSULATION:
Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.
SHELVING:
Adjustable vinyl coated wire shelves (3 per section). Shelves capable of supporting up to 250 lbs.
Full height shelf support pilasters, with double oblong holes on 1/2in centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
LIGHTING:
Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s).
REFRIGERATION SYSTEM:
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain 33°F to 38°F interior cabinet temperature. (non-adjustable
capillary tube system superior to problematic expansion valve)
Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.
ELECTRICAL CHARACTERISTICS:
Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.
A sole use circuit is required.
Attention CA Residents
This machine has many features and benefits including:
CABINET CONSTRUCTION:
DOORS:
INSULATION:
SHELVING:
LIGHTING:
REFRIGERATION SYSTEM:
ELECTRICAL CHARACTERISTICS:
Manufacturer Information | |
| Brand | True |
|---|---|
| Model | TM-74 |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 576.00 lbs. |
| Width | 78.00 in. |
| Depth | 30.00 in. |
| Height | 78.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
CSA Certified
This product has been certified by the Canadian Standards Association (CSA) for its use type. Products with more than one power type, such as electric and gas features, will have multiple CSA certifications.
Made in the USA
This product was manufactured in the United States of America.
