True TM-24F Top Mount 24 Cu.Ft Commercial Freezer Stainless Swing Door

This item is a BRAND NEW freezer that comes with the manufacturers warranty.

TM-24F has a 24 cubic foot capacity and comes with 3 shelves.

This item includes the following features:

CABINET CONSTRUCTION:

300 series stainless steel front grill, shroud and doors. Anodized quality aluminum exterior ends and back.

NSF approved, white vinyl coated aluminum and 300 series stainless floor with coved corners.

Rear wall airflow guard prevents frozen product from blocking optimal airflow.

Barrel lock standard for each door. Locks keyed alike. Digital exterior mounted temperature monitor.

Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. Frame rail fitted with 4in diameter castors, front castors include brakes.

DOORS:

300 series stainless steel exterior with white aluminum interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.

Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 12in long recessed handle with sheetmetal interlock. Handles are foamed-in-place to insure permanent attachment.

INSULATION:

Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

Adjustable vinyl coated wire shelves (3 per section). Shelves capable of supporting up to 250 lbs.

Full height shelf support pilasters, with double oblong holes on 1/2in centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

LIGHTING:

Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s).

REFRIGERATION SYSTEM:

Refrigeration system factory balanced using CFC free R404A refrigerant.

Top mounted condensing unit.

Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain -10°F interior cabinet temperature. (non-adjustable capillary tube system superior to problematic expansion valve)

Defrost system time initiated, temperature terminated.

Automatic evaporator fan motor delay during defrost cycle.

Large evaporator and coil heater permit short defrost cycle.

Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

ELECTRICAL CHARACTERISTICS:

Unit completely pre-wired at factory, and ready for final connection to appropriate outlet (see diagram below and NEMA listing next page. A cord and plug set to be included.

A sole use circuit is required.