Univex MG22 1 HP Meat Grinder 22 Head
Univex Model: MG22 SKU: 157088$4,166.40
In Stock
Pickup Not Available
Similar Models Available: |
---|
New MG32 |
New MG42 |
Free ShippingOn Univex products |
|
Only for customers within the 48 contiguous states.. |
Univex MG22 Specifications
Low Price Guarantee On All Univex Products!
Item:1 HP Meat Grinder 22 Head
Model:MG22
Features
Model:MG22
Features
- Grinds up to 25 lbs per minute on 1st grind with a 3/16" plate
- Cast aluminum housing, worm and ring. Housing is mounted onto the power base by two threaded studs and tighten3ed with two knobs. Housing has internal spiral flutes which match flutes in the tapered worm. Flutes are designed to shear and force the product into the hardened steel knife and through the sizing holes of the plate.
- Accepts industry standard #22 plates and knives.
- 1 HP grease packed gear motor provides compact, smooth and quiet performance with 8:1 reduction within the gear motor, resulting in a 224 RPM driveshaft output.
- Grinding worm is directly coupled to the gear motor output shaft
- Momentary contact start/stop switch with release protection prevents accidental start-ups in the event of power interruption. Microswitch interlock prevents operation of the unit without the chopper properly mounted
- Designed for high volume, heavy duty use
- 16" x 24" aluminum feed pan
- 18.5" x 13.5" plastic storage container with cover
- Aluminum stomper
- Cleaning brush
- #22 3/16" grind plate
- #22 X-knife
Warranty
Attention CA Residents
- 1 year on-site parts & labor warranty
Manufacturer Information | |
Brand | Univex |
---|---|
Model | MG22 |
Power Information | |
Power | 115 volts |
Phases | 1 |
Item Dimensions | |
Weight | 158.00 lbs. |
Width | 22.00 in. |
Depth | 35.00 in. |
Height | 21.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.