Berkel 829E-PLUS 14" 1/2 HP Manual Gravity Feed Series Slicer
Berkel Model: 829E-PLUS SKU: 145815
Out Of Stock
Item discontinued!
| Similar Models Available: |
|---|
 New B14-SLC |
Notice: Shop now before the manufacturer price increase on Jan 01, 2025
Recommended Substitute
Berkel 829E-PLUS Specifications
Low Price Guarantee On All Berkel Products!
Item: 14" 1/2 HP Manual Gravity Feed Economy Series Slicer
Model:829E
Features
Attention CA Residents
Model:829E
Features
- 1-speed, 1/2 HP, totally enclosed and permanently lubricated knife motor.
- Furnished in 115/60/1, 4.0 amps, AC, ETL listed.
- Finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning.
- 45° product table with removable meat pusher.
- Nominal 14" (350 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife.
- Carriage handles food up to 11" (280 mm) wide, by 8-1/2" (216mm) high or 8-1/2" (216 mm) diameter.
- Precise slice adjustment to a thickness of 5/8" (16 mm).
- Top-mounted, two stone knife sharpener produces a consistently sharp knife edge.
- Permanent, tapered knife ring guard covers non-slicing portion of knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning.
- Positive, moisture protected, on/off switch with power light indicator.
- Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P).
- One year limited parts and labor warranty.
Manufacturer Information | |
| Brand | Berkel |
|---|---|
| Model | 829E-PLUS |
| Model | 829E |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
| Watts | 460 |
Item Dimensions | |
| Weight | 97.00 lbs. |
| Width | 23.00 in. |
| Depth | 26.50 in. |
| Height | 22.50 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
